Cable Gland Hawke

Cable Gland Hawke Brass Nickel Plated 501/453/RAC/C/M32Cable Gland serves to embed, protect, and become cable connectors or electrical devices.For reservations please contact the contact listed.

Cable Gland Hawke Brass Nickel Plated 501/453 / RAC / B / 1 "NPTCable gland is one of the electrical accessories that act as a connector or rod antasa sambuangan two ends of the cable. Cabe galnd has a variety of types such as Cable Gland Hawke Brass Nickel Plated 501/453 / RAC / C2 / 1 "NPT which is a type of cable gland NPT or has a rugged drat.Land gland made of brass nickel plated material so that the durability of cable gland become strong and not easy to corrosion.For information on Cable Gland Hawke Brass Nickel Plated 501/453 / RAC / C2 / 1 "NPT and further details please contact us.

Cable gland hawke brass nickel plated 501-453 RAC 1.5 mm NPTApplication Indoor use. For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.FeaturesProvides armour clamping using one clamping arrangement for all armour/braid types.Materials & FinishesThe 150/RAC cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.Technical DataConstruction and Test Standards:EN 50262, BS 6121 : Part 1 Type BW, BX, BY and BZ.Operating Temperature Range:-60°C to +100°CAssembly Instruction Sheet:AI 325. 

Cable Gland Hawke Brass Nickel Plated 501/453/RAC NPT (C2 D)Application Pool or indoor use. For use with non-armoured elastomer and plastic insulated cables installed in conduit.FeaturesProvides a cable retention seal onto the outer cablessheath.When used in increased safety applications, this cable gland may be used with braided cable where the braid and the outer sheath cables pass into the enclosure. The braid must be suitably terminated into the enclosure.Provides female running coupler for cable gland or conduit entry. Materials & FinishesThe 501/412 cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or aluminum. Brass NPT entries are nickel platedthe u.s. standard. Technical DataExd IIC IIC Gb Gb, Exe, Extb IIIC DbCertificate No'sBaseefa06ATEX0056X and BASS 06.0013 X IECEx.Suitable for use in:Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.Construction and Test Standards:IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31.Ingress Protection:IP66, IP67 and IP 68

Cable Gland Hawke Brass Nickel Plated 501-453 RAC Universal OSApplication Outdoor or indoor use. For particular use with:- a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers. b) Cables that exhibit ‘cold flow’ characteristics. c) Enclosures for gas group IIC, under 2 litres in volume and containing an ignition source. d) Enclosures for gas groups IIA or IIB, which are greater than 2 litres in volume and contain an ignition source. FeaturesProvides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.The required number of holes for the cores are punched in the seal by means of a special tool to suit the core size.Provides female running coupler for cable gland or conduit entry.Materials & FinishesThe SB 474 cable gland is manufactured in Brass (standard), Nickel PlatedBrass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.Technical DataExd IIC Gb, Exe IIC Gb, Extb IIIC DbCertificate No'sBaseefa06ATEX0056X and IECEx BAS 06.0013X.Suitable for use in:Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.Construction and Test Standards:IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31.Ingress Protection:IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.Deluge Protection to:DTS01Operating Temperature Range:-60°C to +80°CAssembly Instruction Sheet:AI 309.

Cable Gland Hawke Brass Nickel Plated 501-453 RAC type UNIVERSALApplication Pool or indoor use. For use with non-armoured elastomer and plastic insulated cables. For particular use with:-a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers. b) Cables that exhibit ' coLD flow ' characteristics. c) Enclosures containing an ignition source in the gas group IIC areas or containing an ignition source in a Zone 1 area. FeaturesProvides a barrier seal between the individually insulated cores within the cable and prevents entry of the products of an explosion into the cable.Assembly of the cable gland compresses and distributes the compound evenly to effect a barrier seal at the point of entry into the enclosure.The compound chamber may be separated from the cured compound to ensure that the chamber has been filled effectively. If required, external voids can be repaired.Provides a cable retention seal onto the cables outer sheath. Materials & FinishesThe ICG 623 cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum. Brass NPT entries are nickel plated u.s. standard.Technical DataExd IIC IIC Gb Gb, Exe, Extb IIIC DbCertificate No'sBaseefa06ATEX0058X and BASS 06.0015 X IECEx.Suitable for use in:Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.Construction and Test Standards:IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 6079-31.Ingress Protection:IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4 x.Deluge Protection to:

Cable gland hawke brass nickel plated 501-453 RAC M20Application Outdoor or indoor use. For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables with a lead inner sheath. For particular use with:-a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.b) Cables that exhibit ‘cold flow’ characteristics.c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area.FeaturesProvides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.Provides armour clamping, using one clamping arrangement for all armour/braid types.Provides a seal and an electrical bond on the cables lead inner sheath.Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid.Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.Materials & FinishesThe ICG 653/Universal/L cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum. Brass NPT entries are nickel plated as standard.Technical DataExd IIC Gb, Exe II Gb, Extb IIIC DbCertificate No'sBaseefa06ATEX0058X and IECEx BAS 06.0015X.Suitable for use in:Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.Construction and Test Standards:IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31.Ingress Protection:IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.Deluge Protection to:DTS01Operating Temperature Range:-60°C to +80°CAssembly Instruction Sheet:AI 301 & AI 336.

Sell Cable Gland Hawke Brass Nickel Plated 501/453/RAC/A/ M20Cable Gland is one of the electrical appliance accessories used to embed and secure the other end of the cable on the electrical equipment side.For reservations please contact the contact listed.

Cable Gland Hawke Brass Nickel Plated 501/453/RAC/C/ 11/4" NPT (C C2)Cable gland hawkeis one device that is used as a cable binder, cable connection on the side of electrical apparatus and side termination box will be tightened by using a device called gland cable. Often the gland cable device is spared the serious attention in its quality selection when it has a role as part of safety in the industrial environment.For reservations please contact the contact listed.

Cable Gland Hawke Brass Nickel Plated 501/453/RAC/C2/11/2" NPTCable Gland is one device that is used as a cable binder, cable connection on the side of electrical apparatus and side termination box will be tightened by using a device called gland cable. Often the gland cable device is spared the serious attention in its quality selection when it has a role as part of safety in the industrial environment.For reservations please contact the contact listed.